optoway sps-7110v-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 1 sps-7110v-1tg (rohs compliant) 1310 nm / 1.5 gb/s medium power single optical sm transmitter ********************************************************************************************************************************************************************** features l smpte 292m/297m/259m compatible l speed from 50 mbps to 1.5 gbps l support video pathological patterns for sd-sdi and hd-sdi l single transmitter with simplex lc l based on industry standard sfp l ttl laser disable input l single +3.3 v power supply l rohs-6 compliant l 0 to 70 o c operation l hot pluggable l class 1 laser international safety standard iec-60825 compliant applications l smpte 292m/297m/259m compliant electrical-to-optical interfaces l high-density video routers description the sps-7110v-1tg is a single channel optical single mode transmitter module designed to transmit optical serial digital signals as defined in smpte 292m/297m/259m. it supports from 50 mbps to 1.5 gbps and is specifically designed for transmitted the smpte 292m, smpte 297m and smpte 259m sdi pathological patterns. it is with the sfp 20-pin connector to allow hot plug capability. it is with two independent 1310 nm laser transmitters. each transmitter can transmit signal from 50 mbps to 1.5 gbps with up to 30 km of single-mode fiber when using the sps-7110vw-1rg as the receiver. a maximum distance of 21 km is achievable with 1.5 gbps pathological signals. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information tx1 tx2 p/no. type bit rate (mb/s) (nm) power (dbm) (nm) power (dbm) package temp ( o c) rohs compliant sps-7110v-1tg 1-tx 50 to 1500 1310 0 to -7 lc sfp 0 to 70 yes related products rx1 rx2 p/no. type bit rate (mb/s) (nm) sen. (dbm) (nm) sen. (dbm) package temp ( o c) rohs compliant sps-7110v-1rg 1-rx 50 to 1500 1260/1620 0 to -20 lc sfp 0 to 70 yes link distance transmitter receiver sdi bit rate max. link distance (km) hd-sdi 1.485gbps 21 sps-7110v-1tg sps-7110v-1rg sd-sdi 270mbps 30
optoway sps-7110v-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 2 absolute maximum ratings exposure to absolute maximum rating conditions for extended periods may affect device reliability. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature tc 0 70 o c power supply voltage vcc 0 4 v esd tolerance on all pins 1 kv hbm relative humidity --- 5 95 % rh non-condensing recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating case temperature tc 0 70 o c baud rate 50 1485 1500 mb/s power supply current icc 130 200 ma transmitter specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -7 0 dbm 1 output center wavelength l 1290 1310 1330 nm at 25 o c output spectrum width dl --- 3 nm rms ( ) extinction ratio er 5 db relative intensity noise rin -120 db/hz 270 ps 2, smpte 292m 800 ps 2, smpte 344m optical rise time / fall time tr / tf 1.5 ns 2, smpte 259m electrical differential input voltage v ih - v il 200 1200 mvp-p ac coupled input disable input voltage -- low v tdis,l 0 0.8 v tx output enabled disable input voltage -- high v tdis,h 2.0 vcc+0.3 v tx ouput disabled v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 1. output power is power coupled into a 9/125 m m single mode fiber. 2. 20% to 80%, unfiltered. module definition module definition pin 5 pin 6 interpretation by host 4 scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, scl and sda appear as no connector (nc). when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway sps-7110v-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 3 connection diagram pin name function notes 1 vee signal ground 2 nc no connection 3 nc no connection 4 vee signal ground 5 scl serial i 2 c clock 6 sda serial i 2 c data 7 vee signal ground 8 nc no connection 9 nc no connection 10 nc no connection 11 vee signal ground 12 nc no connection 13 nc no connection 14 vee signal ground 15 nc no connection 16 vcc tx power supply +3.3v 5% 17 vee signal ground 18 tx+ positive transmitter data in 19 tx- negative transmitter data in ac coupled differential lines with 100 ohm differential termination inside the module 20 tx_dis transmitter disable internal 4.7 k pull-up. the bias current and modulation current are turned off if tx1_dis = high.
optoway sps-7110v-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 4 recommended circuit schematic 100nf vee 100 differential tx - tx + vcc_tx nc nc nc nc tx_dis 20 18 19 16 15 8 9 17 vcc 3.3v 10 nc tx_dis scl sda 10k 5 6 nc nc nc vee vee nc vee vee 14 2 4 1 12 3 11 7 13 10uf 1uh 10k td + td - re-clocker i2c data i2c clk vcc 3.3v 100nf 10uf 1. consult the chipset manufacturer s applications information for biasing required for tx outputs. some chipset outputs are internally biased and may not need external bias resistor. package diagram ( units in mm) note: since the sps-7110vw-1tg is single channel device, the receptacle for channel 2 is not used.
optoway sps-7110v-1tg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 5 revision history version subject release date 1.0 initial datasheet 2008/10/1
|
